🍷 Two-prong cork puller (ah-so)
Also known as: ah-so, ah so, butler's friend, twin-prong cork puller, two-pronged cork extractor, cork puller
The two-prong cork puller, or ah-so, is a pair of thin blades on a handle that grip a cork from the sides, useful for old, fragile corks.
The two-prong cork puller, or ah-so, is a pair of thin metal blades on a handle. You slip them down either side of the cork, between cork and bottle neck, and then twist and pull. It grips the cork instead of piercing it, which is why people reach for it when a cork is old and crumbly. Some patents also call it the butler's friend.
The idea is older than most people expect. US patent 212,863 was issued on 4 March 1879 to Lucian C. Mumford of San Francisco. His puller had two blades pushed down on opposite sides of the cork. Squeezing the handles clamps the cork, and a gradual turn draws it out. The patent says this spares the cork and spills less wine.
A later patent, US 7,290,463, describes the technique. Start with the longer blade, rock it down part way, then add the shorter one, and keep alternating until both lie along the cork. Then give the handle a slight twist and lift. The same text admits that ordinary ah-so tools sometimes push a fragile old cork into the bottle, and it adds a rest on the bottle top to stop that.
It is not magic. Another patent, US 5,588,342, says a two-prong puller does break the seal between cork and neck, but gives only a small mechanical advantage. A very tight cork can bend the blades, the blades can scratch the inside of the neck, and a pull off the axis can snap the neck. Pull straight and slow.
Next to the waiter's friend, the difference is the grip. The waiter's friend screws into the cork, the ah-so holds it from the sides. Both are corkscrews in the wider sense.
Facts
How it connects to Wine
🍷 Two-prong cork puller (ah-so) → kind of → 🍷 Corkscrew ← association ← 🍷 Wine
Links
- Part of
- 🍷 Corkscrew
Frequently asked questions
What is an ah-so?
A handle with two thin blades that slide down both sides of a cork to pull it without piercing it.
Why not just use a screw corkscrew on an old cork?
Old corks are fragile, and a patent says ordinary versions sometimes push such a cork into the bottle.
Which blade goes in first?
The longer one, rocked down part way. Then the shorter one follows, and you alternate until both lie along the cork.
Can it break the bottle neck?
Yes, if you pull off the axis. US 5,588,342 also warns that the blades can scratch the inside of the neck.
Is the ah-so a modern gadget?
No. A US patent for a two-blade cork puller was granted on 4 March 1879.
Similar
Sources
- USPTO. US 212,863 A, Improvement in cork-extractors (Mumford, 1879)
- USPTO. US 7,290,463 B2, Bottle stop remover
- USPTO. US 5,588,342 A, Cork puller for pulling corks from a range of bottle top sizes
- USPTO. US 2015/0353333 A1, Encased wine opener with bottle opener
