towardia Where things come from.
Englishen

🏭 Milk processing at the dairy plant

Category ✔ Checked: 11.2026 · sources: 4 Updated: — FAQ and comparison updated

How milk is tested, treated and turned into products: processes, equipment, starters.

Milk processing at the dairy plant covers what happens to raw milk between the tanker and the pack: cooling, testing, heating, homogenization, filling and labelling. At a dairy plant in the EU the incoming milk is quickly cooled to 6 °C or below if it is not processed within 4 hours of arrival.

The key step is heat treatment. In the EU, pasteurization means at least 72 °C for 15 seconds or 63 °C for 30 minutes; in practice homogenized milk is heated to 72–75 °C for 15–20 seconds. The laboratory checks that it worked: the alkaline phosphatase test has to be negative. According to FAO, pasteurization extends shelf life and cuts possible pathogens to a level that poses no significant danger.

For UHT treatment milk is heated in a continuous flow to at least 135 °C, in industry practice to 135–150 °C for 1–10 seconds. Afterwards, in an aseptically sealed pack, it has to stay stable for 15 days at 30 °C or 7 days at 55 °C.

A homogenizer breaks up the fat globules, on average from 3.5 µm to under 1 µm, so that the cream does not rise. The method was invented by Auguste Gaulin in 1899. Yet some countries leave milk unhomogenized, because a good cream line is seen as a sign of quality.

Dairy-plant milk or milk straight from the farm? The difference is a chain of checks: quick cooling to 6 °C or below, heat treatment, a laboratory test for alkaline phosphatase, and standardized fat. Raw milk skips the heat step, and the FDA warns of the danger of drinking it. Pasteurized and UHT milk are also different: pasteurization cuts pathogens to a level that poses no significant danger, while UHT sterilizes at 135–150 °C so that the pack keeps without a fridge until opened. Homogenization is separate again and only changes how the fat is spread.

On the pack, the label tells you the treatment: “pasteurised”, “UHT” or “ultra-high temperature”, and “homogenised” if the fat globules were broken up. Fat content is stated as whole, semi-skimmed or skimmed; in the EU whole milk has at least 3.5 % fat. UHT milk sits unrefrigerated on supermarket shelves, whereas pasteurized milk is sold chilled and needs the fridge. Small dairies and market stalls also sell milk, so read the treatment on the label.

The milk is then standardized for fat (in the EU whole milk has at least 3.5% fat and skimmed milk no more than 0.5%), filled on the filling line and labelled. Part of it goes into cheese and fermented products, where the casein is set by rennet or by lactic acid bacteria from a starter culture.

How it connects to milk

🏭 Milk processing at the dairy plant → kind of → 🥛 Milk

Part of
🥛 Milk

Frequently asked questions

What is the difference between pasteurized and UHT milk?

In the EU, pasteurization means at least 72 °C for 15 seconds or 63 °C for 30 minutes, and the milk is then kept chilled. UHT milk is heated to at least 135 °C, in practice 135–150 °C for 1–10 seconds, and in an aseptically sealed pack it stays stable at room temperature.

Is it true that pasteurization destroys the goodness of milk?

No. According to the FDA, pasteurization effectively kills pathogens without significantly affecting the nutritional value of milk, and the concentration and bioavailability of calcium do not change.

Why is milk homogenized?

To stop the cream from rising. A homogenizer reduces the fat globules on average from 3.5 µm to under 1 µm. Some countries deliberately sell unhomogenized milk because a cream line is considered a sign of quality.

How can you tell that milk has been pasteurized properly?

Right after treatment an alkaline phosphatase test is carried out, and in the EU it has to be negative. Proper pasteurization inactivates this enzyme, so its absence shows that the heating was sufficient.

How much fat is in whole and skimmed milk?

In the EU whole milk has at least 3.5 % fat and skimmed milk no more than 0.5 %. The dairy standardizes the fat before filling.

Similar

🥛 Drinking milk by processing · 🧀 Dairy products · 📜 Milk in culture and language · 🏡 On the farm: feed, grazing and milking · 🚚 Milk transport, storage and sale · 🍼 Milk containers and tableware

What it includes

All (34) →

Results: 34 of 34

Sources

🕸 Show on the map of linksAll topics